Five different models to choose from! Choose a compact disintegrator based on your electricity! Lead time is 10-12 weeks after receipt of order.
Note: The GSA Herbold 22/30C is not NSA approved yet. The 22/30C-4 and 22/30C-5 models ship FREE to Germany, Portugal, and Italy!
The new GSA Herbold 22/30c Disintegrators from Herbold Meckesheim USA has a destruction rate of 350 pounds per hour.
Model:
GSA Herbold 22/30C -1
GSA Herbold 22/30C -2
GSA Herbold 22/30C -3
GSA Herbold 22/30C -4
GSA Herbold 22/30C -5
Power:
208 Volt, 3 phase, 60Hz
230 Volt, 3 phase, 60Hz
460 Volt, 3 phase, 60Hz
220 Volt, 3 phase, 50Hz
380 Volt, 3 phase, 50Hz
Destruction Rates:
350 pounds per hour
Horsepower:
15 horsepower standard
Throat Size:
9'' x 12''
Shreds Paper:
Yes
Shreds CDs and DVDs:
Yes
Shreds Punched Key Tape:
Yes
Cutting System:
3 rotating and 2 stationary knives
Machine Dimensions:
38'' length x 30'' width x 72.5'' height
Machine Weight:
1330 pounds
Electrical Disconnect Information:
208 Volt, 3 phase, 60Hz Minimum branch circuit size @ 208 volts 105 amps, 200 amp disconnect required, it is possible to use a 100 amp disconnect if allowed.230 Volt, 3 phase, 60Hz Minimum branch circuit size @ 230 volts 95 amps, 100 amp disconnect required460 Volt, 3 phase, 60Hz Minimum branch circuit size @ 460 volts 50 amps, 60 amp disconnect required220 Volt, 3 phase, 50Hz Minimum branch circuit size @ 220 volts 95 amps, 100 amp disconnect required380 Volt, 3 phase, 50Hz Minimum branch circuit size @ 380 volts 50 amps, 60 amp disconnect required
Front View of GSA Herbold Disintegrator Model 22/30c
View of belt driven gear
GSA Herbold Disintegrator Cutting Blades
GSA Herbold Disintegrator Knife Jig Knife jig allows all adjustments to be made quickly and easily. Outside of the granulator
Lead time 4 weeks after receipt of order!
Benefits of Herbold Disintegrator Models 22/30C over competition
Adjustable rotor knives Provides constant distance between the rotating knives and security screen. This reduces dust generation, output as the cutting circle remains the same no matter how many times the knives are sharpened. Competitive units as the knives are sharpened the distance from the security screen grows allowing more build up of material on top of the screen which lowers the rate as the knives are reduced in length and creates more dust because of it.
Service Access 1) The competitive unit has no access above the cutting rotor. The Herbold 22/30C hinges above the rotor providing full access and again is much safer. 2) These models include a mechanical winch for opening vs. competition that has a manual lifting. The Herbold Disintegrators are more operator/technical friendly and safe.3) All of the Herbold Disintegrator access points have non tamper proof limit switches vs. competition unit does not (it still uses old style push button switches). Again, the non tamper proof limit switches on the Herbold models are more safe.
Stronger Horsepower The Herbold Disintegrators offer a 3 horsepower air system as standard vs. competition horsepower. That is a big difference!
AVAILABLE OPTION: Integrated sound enclosure Sound package in lieu of competition's box enclosure providing better access without moving the machine out of the enclosure you would do on the competition unit.
Jig/fixture for knife adjustment The Herbold Disintegrator knives are adjusted in a fixture outside the machine instead of adjusting inside the units cutting chamber. This shortens the down time as the method cuts knife change in half. It is also much safer by reducing the exposure to the cutting edges of the knives inside the machine as competitive models do.
Clean Out The Herbold Disintegrator transition slides out, chamber splits at the rotor, and hopper tilts back 100% vs. competition's access of 60%
Vibration Isolators Herbold Disintegrators come equipped with vibration isolators in lieu of casters as standard.
Exterior Color Finish Herbold Disintegrators have a beautiful exterior color finish that matches any decor.
Features:
Integrated sound retention reduces noise and floor space requirements
Single voltage operation reduces operation and installation costs
Open rotor design for better air flow and quieter operation
Tamper proof safety switches
Rotor end seals and cutting chamber sealing to limit dust leakage
Versatile infeed hopper with interchangeable trays for hand or conveyor feeding.
Built-in vibration isolators in lieu of casters
Warranty: SUCH WARRANTIES ARE IN LIEU OF AND EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE. SELLER MAKES NO WARRANTY OF MERCHANTABILITY AND NO WARRANTY THAT THE MATERIAL SHALL BE FIT FOR ANY PARTICULAR PURPOSE. Any claim on account of defective materials or for any other cause whatsoever shall conclusively be deemed waived by Purchaser unless written notice thereof is given to Seller promptly after discovery of the alleged defect, and in any event no later than twelve months from shipment. Seller shall have the right either to replace or repair any defective materials, to refund the purchase price upon return of the material or to grant a reasonable allowance on account of such defects, and Seller's liability and Purchaser's exclusive remedy for defective materials shall be limited solely to replacement, repair, refund or allowance as Seller may elect. This warranty will not apply if damages are caused by repairs made by anyone other than the Seller without prior authorization from the Seller, lead seals have been removed, specified checks not having been made, parts subject to normal wear and tear, such as V-belts, bearings, knives, screens etc., improper or inadequate maintenance or improper use. Seller will not be liable for goods supplied by its subcontractors but agrees to assign to Purchaser all warranties of such subcontractors to Seller or enforce such warranties on Purchaser's behalf.
Shopping
Cart
