The new MBM Crease Matic 150 is a fully programmable manual fed card creaser developed
specifically for the short to medium run digital print market. Designed and
Manufactured in the UK. It bridges the gap between desk top card creases
suction fed models. Over 2000 sheets per hour can be stream-fed by hand – simply advance the sheet to the input rollers and the MBM Crease Matic takes over.
Features
The creasing rule and matrix system prevents ink or toner cracking when folding
digitally printed card. A slide-out, reversible creasing matrix allows card up to 350gsm
to be creased.
Making it ideal for digital printing applications
Accommodates sheet sizes up to 39 inches
2 matrix creasing tools allow the setting of 4 different crease widths to accomodate a wide variety of paper stock
Quiet operation and the drive motor shuts down if not used for a period of time.
In-line perforating system
Mounted on casters
This machine a footprint of 40.5'' x 18.5''.
Matrix Creasing Tools
2 matrix crease bars allow 4
crease widths to be set.
Perforating System
Built-in perforating wheel is
easily engaged for in-line perfing
Speed
2,000 sheets/hr
Acceptable Paper Sizes
5 3/4" x 8 1/4" to 13" x 39"
Acceptable Paper Weight
30 to 130 pound
Sheet Capacity
Single sheet feed
Number of Programs
5 programs
Number of Creases per Program
Up to 9 creases per sheet (11'' x 17'')
Perforating System
Included
Air Feed
No
Electrical
120 V, 60 Hz
Dimensions (with stand)
18 1/2'' length x 40 1/2'' width x 39 1/4'' height