|
The paper folder industry uses many terms and specification ratings. To help you
understand the differences between these terms,
Machine-Solution.com has included a list of those used most frequently.
If after reading this section, you need further professional assistance, please
feel free to contact the Manager of Paper Shredder Sales at 800.203.0233 or send
him an email at paul at machine-solution dot com. Solutions to all paper folder
issues may be found at Machine-Solution.com
|
Auto On/Off:
Paper shredding action starts automatically when paper is inserted into the feed
opening and stops after the paper has been completely shredded. It is controlled
by the paper contacting a mechanical sensor or by breaking a light barrier.
Auto Reverse:
To help prevent paper jams, the paper shredder will automatically reverse, momentarily,
if an overfeed occurs. This is accompanied by an audible and visible warning. This
feature is available on select models as part of the complete electronics package.
Bag Full-Auto Off:
When the waste bag or bin reaches a pre-set level, a sensor turns the paper shredding
action off. This is accompanied by an audible and visible warning. This feature
is available on select models.
Capacity:
The number of 8 1/2" x 11" sheets of paper that can be shredded at one time by the
paper shredder. Generally shown as two numbers, the first using 20 lb paper and
the second using 16 lb paper. These numbers are only a guideline. Paper quality,
type of paper and atmospheric conditions can effect the paper shredder capacity
rating.
CrossCut:
Documents are cut in two directions producing small particles. The size of these
particles offer greater security and are self compacting, which reduces overall
bulk.
Feed Width:
The size of the opening where paper is inserted into the paper shredder.
High Security:
Engineered to meet the demanding requirements for Top Secret data destruction. High
Security paper shredders are perfect for military, Federal, State and local government
agencies as well as defense contractors. Purchasing of paper shredders may be conducted
under GSA contract for federal government at
Machine-Solution.com.
Motor:
Measured in horsepower, it is the available paper shredding power that is calculated
from the wattage specifications of the motor.
Shred Size:
The overall dimensions the paper is reduced to. Shown as one number for Strip Cut
paper shredder models and two numbers for Cross Cut paper shredder models.
Speed:
Shown in "feet per minute", the number is determined by shredding continuous forms
and calculating the length of paper shredded over a given time.
Strip Cut:
Documents are cut into thin unreadable strips. Generally the strips will be the
length of the document.
Waste Capacity:
Measured in gallons, it is the volume of paper that the waste bag or bin can hold.
Save 10% Off Paper Folders
|
Shopping
Cart
